Yes. Your estimate updates when the model does. BidLight lives inside Revit. You export, and it reads the geometry and metadata. It classifies line items at 86% accuracy and pulls current pricing from the database. Move a door two inches, re-export, and your numbers refresh immediately.
Every export is versioned and diffed element by element. You always know what changed and what is current. No chasing PDFs. No manual re-takeoffs.
Estimators who use it report saving about 680 hours a year. More accurate numbers mean you win more work, up to a 35% win rate. And you can turn early estimates into a service you bill for.
The old way is $50,000 in field labor standing idle for three weeks. BidLight costs less than that for the whole project.
Stop chasing. Start winning with numbers you can defend.

Yes, your estimate updates when the model does. BidLight lives inside Revit. Export once, it reads geometry and metadata, classifies line items at 86% accuracy,

How does BidLight make sure my estimate is always based on the current model?

Right. AI takeoff hype is a distraction. Get numbers you can defend from your model.
BidLight runs the estimate on the geometry you already trust. When a door moves two inches, the price moves with it. No more chasing update emails or redoing takeoffs.
That&#39;s the real cost of a spreadsheet estimate. You export the model, get labor, equipment, material, and time costs in minutes. Two AI models classify line items at 86% accuracy. Pricing pulls from a database of roughly $30,000 plus Craftsman, 1Build, and RSMeans.
You get answers before the meeting. If a duct clashes, you know the impact before you&#39;re three weeks behind. You defend your numbers with real model data, not a static PDF.
Stop coordinating by PDFs. Start estimating from the model. The numbers update when the design does.
Try a demo on the site.

Right. AI takeoff hype is a distraction. Get a number you can defend from your model.

BidLight runs the estimate on the geometry you already trust. When a door

Keep it simple: AI takeoff hype is a distraction. Get numbers you can defend from your model. BidLight runs the estimate on the geometry you already trust, so

A small clash in the model can turn into a $50,000 problem in the field. Here&#39;s why: when a duct and a pipe occupy the same space, nobody catches it early. By the time it&#39;s found, crews are standing idle. That idle time costs $15K–$50K every week. Three weeks of that and you&#39;ve spent more than BidLight costs for the entire project.
BidLight kills that waste. It runs inside Revit and Navisworks, so you publish straight from the federated model. Every export is versioned and diffed element by element. Issues are tracked in one place, not scattered across Teams, email, and Bluebeam. You get a daily digest of what you own by 6am. No more digging through PDFs or guessing who moved what.
The result: you catch clashes before they hit the field. You keep labor moving. You defend your numbers with real data. That&#39;s how a $50 problem stays $50—not $50,000.

A small clash in the model can turn into a $50,000 problem in the field. When a duct and a pipe share the same space, nobody catches it early. By the time it's 

Why does a clash that costs $50 in the model become a $50,000 problem in the field?

That $8,000 change order is what happens when a coordination slip goes unnoticed until the GC meeting. By then, the rework costs real money. BidLight catches that early. It runs inside Revit and Navisworks, so you publish straight from the model. Every export is versioned and diffed element by element. You get a daily digest by 6am telling you what you own and what changed. Issues are tracked in one place, not scattered across Teams, email, and Bluebeam. No more hunting for the latest PDF. You know who moved what, who&#39;s behind, and where the clash sits. That&#39;s the difference between a $50 fix and an $8,000 change order. Stop the bleed before it starts. Try BidLight and see your next change order coming from a mile away.

Stop chasing updates before they cost you an $8,000 change order. BidLight runs inside Revit and Navisworks, so you publish straight from the model. Every expor

How does BidLight catch an $8,000 change order before it happens?

Your QTO is a lie because it&#39;s already wrong the moment you export it. Design changes. You re-export. You re-measure. That&#39;s hours you&#39;ll never get back, and numbers you can&#39;t defend in a bid.
BidLight fixes that. You export from Revit once. Two AI models read geometry and metadata, classify line items at 86% accuracy, and pull current pricing from a $30,000 database plus Craftsman, 1Build, and RSMeans. Labor, equipment, material, time—all in minutes.
When the design changes, your estimate updates in real time. No re-takeoff. No chase. No surprises.
You win more work with numbers you can defend. And you turn early estimates into a service you can bill for. Stop lying to yourself. Get numbers that hold up.

Your QTO is a lie because it's already wrong the moment you export it. Design changes. You re-export. You re-measure. That's hours you'll never get back, and nu

What should I know about Your QTO Is a Lie. Here's Why.?

BidLight&#39;s coordination tracking means you stop spending hours chasing who changed what. Every export is versioned and diffed element by element, so you can see exactly what moved and when. You get a daily digest of issues by 6am, so you know what you own before the coordination meeting. No more comparing PDFs side by side. No more digging through Teams, email, and Bluebeam for scattered issues. Your team can answer &#39;who changed what?&#39; in minutes, not meetings. That&#39;s the difference between a two-hour coordination call and a quick decision. And when clashes sit unresolved, field labor can stand idle at $15K–$50K a week. BidLight keeps those delays from ever costing you that much. It runs inside Revit and Navisworks, so you publish straight from your model. You&#39;ll see what&#39;s behind before the GC tells you, and you&#39;ll have the record to prove it.

Stop chasing down who changed what. BidLight versions every export and diffs it element by element. You see exactly what moved and when. You get a daily digest 

680 hours saved by coordinating in one place?

A 1,200 door count in the model versus 1,100 in your bid means your bid is wrong, and that gap is a direct hit to your margin. The model is the source of truth. BidLight reads the geometry and metadata straight from your Revit export, so what you price matches what gets built. No more manual takeoffs where doors slip through the cracks.
Run a fresh export from Revit and let BidLight classify every line item. It uses two AI models to hit 86% accuracy against a pricing database of roughly $30,000, so you catch missing doors before you bid. If your design changes, the number updates in real time.
Here&#39;s how to close the gap: 1. Export your current model from Revit. 2. Let BidLight auto-generate the takeoff with labor, equipment, and material. 3. Review the line item list against your bid. 4. Adjust your estimate to match. 5. Use the revised number to win work you can defend.
That 1,100 bid loses you money. BidLight gets you to 1,200, fast.

A 1,200 door count in the model versus 1,100 in your bid means your bid is wrong, and that gap is a direct hit to your margin. The model is the source of truth.

Why does my model say 1,200 doors but my bid says 1,100?

A 2-inch move shouldn&#39;t cost you $47,000 in field labor. It happens because nobody catches the change until it&#39;s too late, and then the coordination meeting burns hours while work stalls. The fix isn&#39;t another spreadsheet, it&#39;s a system that flags the shift the moment it happens.
BidLight records every model export and diffs it element by element. So when a duct moves two inches, you see it in your digest by 6am the next day. You know who changed what, when, and why, without a single meeting. Issues live in BidLight, not scattered across Teams and email. You find the one you need in seconds.
Catching a change early avoids three weeks of idle labor at $15K to $50K per week. That&#39;s why teams at Tesla and Skanska use BidLight. Stop chasing changes. Start winning more work with numbers you can defend.
Get started with a demo at bidlight.com.

A 2-inch move shouldn't cost you $47,000. It happens because nobody flags it in time. Then the coordination meeting stalls, and work waits. Spreadsheets aren't 

Why a $47,000 2-inch move deserves a better answer: because the current answer costs you money and sleep. We dug into how a 2-inch shift can balloon into a

A door moving 12 inches doesn&#39;t seem like much, but it can cost you $40,000. Why? Because every trade downstream depends on that opening. The duct, the pipe, the conduit, the framing. All of it needs to move. You don&#39;t find out until the coordination meeting. Then you lose days re-coordinating, re-sequencing, and potentially ripping out installed work. Field labor stands idle. That&#39;s the real cost.
BidLight kills that surprise. Every export is versioned and diffed element by element. When that door moves, you get a digest by 6am. You know exactly what changed and who changed it. No more side-by-side PDF comparisons. No more digging through emails. You see the impact before it becomes a $40,000 problem.
Here&#39;s what you do next: 1. Publish your model from Revit or Navisworks. 2. Get your daily digest of changes. 3. Review the diff to see what moved. 4. Assign the fix to the right trade. 5. Track the issue until it&#39;s resolved.
That&#39;s it. You stay ahead of the change, not behind it.

A door moves 12 inches. That's a $40,000 mistake waiting to happen. Because every trade downstream depends on that opening: duct, pipe, conduit, framing. All of

What should I know about A door gets moved 12 inches. Here's the $40,000 mistake you just made.?

That 30-second habit is probably you saying yes to a meeting without checking the latest model. When you walk in blind, the coordination meeting burns two hours finding out who moved what. Three weeks later, you find out a trade fell behind. A clash sits unresolved for a week, and $15K to $50K of field labor stands idle. Multiply that across a year, and it adds up fast.
You can stop it by making your numbers update with the model. BidLight exports straight from Revit or Navisworks, versions every export, and diffs element by element. You know what changed, who changed it, and when. Issues are tracked in one place, not scattered across Teams and email. You get a digest by 6am, so you walk into every meeting with the full picture.
That&#39;s why teams at Microsoft and Skanska use it. They don&#39;t chase PDFs. They don&#39;t re-do takeoffs. They just open BidLight and see what they own. The 30-second habit disappears. So does the $12.3M leak.

That 30-second habit is probably you saying yes to a meeting without checking the latest model. When you walk in blind, the coordination meeting burns two hours

FAQ

Questions tagged [load]