What should i know about your takeoff software does not know a w10x33 beam from
1
Most file comparisons look at drawings or file names instead of elements, so a W10x33 swapped for a W12x40 slides by unless someone spots it by eye. You end up checking the steel schedule by hand.
add comment
Answers
0
<p>Most file comparisons look at drawings or file names instead of elements, so a W10x33 swapped for a W12x40 slides by unless someone spots it by eye. You end up checking the steel schedule by hand.</p>
<p>BidLight compares revisions element by element inside your Revit and Navisworks models, so the beam appears as a changed element under structural, with its author and the revision that delivered it.</p>
<p>Because every publish is a versioned snapshot, you can compare any two revisions. You publish the model, read the changes by category, and pin an issue to the beam and to anything it now collides with. The issue carries the sheet and revision it came from, and the owner sees it in the 6am digest.</p>
<p>The part you feel: you find the swap in about 15 minutes instead of a 90-minute meeting. A clash caught in the model costs about $50. In the field, $5,000 to $50,000.</p>
<p>Plans run from Basics at $260 per license per year to Max at $590, with Enterprise pricing if you need more.</p>